Tired of mounting prints by hand! The Polar Cub manual laminator available in a 25" or 34" working width is just what you're looking for. It saves half the time of mounting by hand, accepts board up to 1" thick and is equipped with high quality silicone rollers that ensure consistent pressure and professional results. Also, entry and exit feed tables to support boards.
Easy to Use
To set the gap between the rollers to match the thickness of your board, place your board between the rollers and close the rollers by turning the height control knob until there is no light between the board and the rollers. Then tighten the rolls a half turn on the height control knob. If you are using the same boards all the time, this will only need to be done once.
Peel back the first inch of the release liner. Smoothly tack down your print to the inch of exposed adhesive. Insert the tacked edge into the laminator, remove the remainder of the release liner. Hold your print up so that it is smooth against the rollers.
Turn the handle to pull your print and board through the laminator. Your print will be mounted, trim your print if desired.
Can mount boards up to 1" thick
Uses all types of self stick adhesive coated mounting boards
Rugged design and ready to use out of the box
Great for mounting larger prints
Professional grade silicon rollers provide even pressure and insure bubble free results and any exposed adhesive on the board will not stick to the rollers
Starter kits come complete with everything you need to start mounting and laminating, with foam board cutters and supplies. Everything you need to start finishing your prints for display.
Starter Kit Includes:
25" Polar Cub Laminator
Image Edge 48” Foam Board Cutter
24”x36: Self-Healing Cutting Mat
24”x36” Adhesive Foam Board (10 sheets)
24.5”x36.5” Gloss Pouch Boards (10 sheets)
20” x 30.5” Matte Polar Pouch Boards (10 sheets)
20” x 30.5” Gloss Film Sheets and sled (10 sheets)
Polar Cub 38” Laminator
Image Edge 48” Cutter
36”x48” Cutting Mat
32”x40” Adhesive boards (10 sheets)
24”x36” Adhesive Boards (10 Sheets)
24”x36.5” Matte Pouch Boards (10 Sheets)
24”x37” Gloss Laminating sheets (10 Sheets) plus sled