This 12" wide machine produces a superb finish and edge seal, it is capable of speeds up to 16 feet per minute. It can use films from 1.5 mil to 10 mils thick and will laminate materials, such as foam board to 1/4" thick. Warm up time is about four minutes. This is truly a professional machine in every aspect.
The PL1200HP features a digital display and a solid-state temperature control. The temperature sensor that is located just below the surface of our laminating rollers is accurate to within 1° on the digital temperature display. Analog input controls for our digital temperature control interface and provides even casual operators a certain "feel" that is often associated with their stove at home.
The micro-adjustable slitters on the PL1200 offer the most accurate cut and highest quality finish available. The unique blade angle adjustment allows for a perfect edge cut without curl with the slitting process taking place over the cooling fans. This cools the blade preventing build-up of adhesive on the blade. This system allows for a minimum cut as narrow as 3". Additional slitting heads can be added for slitting multiple pages side by side.
Handles films up to 12" wide
Four minute warm up time
Laminates 1.5 to 10 Mil
Lightening Quick, Sustainable Thermal Response
Variable Speed Control, Reversible
Laminates/Mounts To 1/4 " Thick
12"diameter film roll capacity
Digital Temperature Read Out
Cooling fans, one set standard
Ultra Duty welded stel stand standard
Micro adjustable slitter assembly
Stand is included along with 3" roll mandrels
Maximum Sustained Lamination Speed:
1.2 Mil @ 230 degrees 16 feet per minute 3 Mil @250 degrees 7 feet per minute
Max Film Thickness Max Substrate Thickness
10.0 Mil .250
4 @ 110 CFM ea.
Warm Up Time
Less Than. 5 min.
Max Film Roll Diameter of 1.5 mil film
2 Micro-Adjustable Included
Heated Roll Watts
1350 ea 2700 combined, 9215 BTU's
38"W x 20"D 16"H -w/o stand 40"H-w/ stand
Shipping Dimensions (2 Packages)
Laminator 18" x 43" x 20" Stand 23" x 33" x 8"
Weight Laminator and Stand
Laminator 92 lbs Stand 62 lbs
Note: These units are rated for light to medium duty use and are not recommended for a large volume industrial setting. The use of this machine in that environment can result in damage to the rollers that will not be covered under the warrantee.