The Pro-Lam PL227HP is a 27" high performance commercial roll laminator that includes 1/4 inch mounting capabilities. It will run thermal laminating film from 1.5 mil up to 10 mil and at speeds up to 16 feet per minute.
With a warm up time of less than 5 minutes, just turn it on when you need it, saving electricity when not in use. The features on Pro-Lam PL227HP lamiantor are designed for a small to medium print shop and include 3" supply mandrels, welded steel stand, slitters and feed guide. If you are in the market for a machine with a 27" capability and superior finish results at a reasonable speed and price, this is the machine for you.
27" Wide Lamination
Speeds up to 16 feet per minute
Warm up time within 5 min.
Variable speed control
Laminates / mounts up to 1/4" thick
12" dia.+ film roll capacity
Digital temperature read out and control
Lower cooling fans
Ultra duty welded steel stand standard
Micro adjustable slitter assembly
Max Mechanical Speed: 16 fpm
Maximum Sustained Lamination Speed: 1.2 Mil @ 230 degrees 16fpm
3 Mil @250 Degrees 7 fpm
Polyester, Polypropylene, Nylon, vinyl, and other plastics - Thermal or Cold
Max Film Thickness
Max Substrate Thickness
4 @ 110 CFM ea. = 440 cubic feet per minute
Warm Up Time
Less Than. 5 min.
Max Film Roll Dia. 1.5 mil
w/o stand 6", with stand 11"
Standard, 3" Mandrels Included
Yes-Front Heat and Rear Pull Rollers
Solid State - Digital Readout 2 degree hysteresis
Motor / Speed Control
DC High Torque Gear Motor / Solid State Variable, Both Air Cooled
Note: These units are rated for light to medium duty use and are not recommended for a large volume industrial setting. The use of this machine in that environment can result in damage to the rollers that will not be covered under the warrantee.