The Standard Horizon PC-450 is a high-quality paper cutter designed to bring new levels of efficiency to quick printers and in-plant print shops and binderies. It offers a cutting capacity up to 17.7" wide, illuminated cut line and a maximum lift of 2.7".
Features:
Accurate Cutting - The backgauge enables you to adjust the cutting length accurately by 0.5mm / 0.019".
Cutting line - The LED cutting line shows the actual cutting position. It allows the safe and smooth operation.
Safety - The APC-450 is activated only when the two cutting buttons are simultaneously pressed. The machine does not operate when the front cover is opened. Also, if either of two cutting buttons is released during the cutting operation, the machine stops immediately. There is also the cover on the back of the table for the safety for the maximum safety.
Easy Operation - Clamp the stock by turning the pressure handle by hand, and press two cutting buttons.
Cutting Length Adjustment - The backgauge can be adjusted by 0.5 mm / 0.019" by turning the handle at the front table. The backgauge can be locked when you repeat the same cutting job.
Operator Safety - Double Safety Circuit, if the error occurs, the machine detects the trouble part. Also, the relay with forcibly guided contacts are provided to secure the safety.
Safety Mechanism - The machine does not operate when the front cover is opened. Also, if either of two cutting buttons is released during the cutting operation, the machine will be stopped immediately.
Key Switch - The power switch can be key-activated to limit user access.
Clamp - The special cutouts are provided on both edges of clamp to prevent the book spine from crushing.
Counter - Cut cycles are indicated on a digital counter. It helps to determine when the cutting knife should be replaced.
PC-450 Specifications:
Cutting Width - Max. 446 mm / 17.5”
Cutting Height Max. 70 mm / 2.75”
Cutting Depth Max. 450 mm / 17.7” / Min. 20 mm / 0.79”
Clamp System and Pressure - Manual - Max. About 10 kN (1,000 kgf)
Cutting Speed - 2.8 seconds per cycle (60 Hz)
Voltage/Frequency - Single Phase 115 V, 50 / 60 Hz
Rated Current Single Phase 115 V, 50 / 60 Hz, 13 A
Machine Dimensions - W x D xH - 830 x 890 x 1,300 mm / 32.7" x 35.1" x 51.2" (Including the parts projected such as handle)
Shipping Dimensuions- 44" H x 39" W x 39" L
Machine Weight 216 kg / 475.8 lb (Without transformer)