DeLuxe Stitcher manufactures both traditional and side-feed stitcher heads which are interchangable with Hohner, ISP/Interlake, Muller-Martini, Osako, & Purlex heads. With 10 different heads in a variety of configurations we are sure to have the right stitcher head to match your requirements.
G5 Head - This head was designed with the latest technology in mind. From its front-locking mount system, to its Latchless construction and side-feed operation, this Head is easy to use. The G5 is a low-cost alternative for collators requiring a smaller capacity Head with greater reliability.
G8 Head - This head features a side-feed design, eliminating the need for a Swivel, dramatically increasing the reliability of this head and can be used on virtually any stitcher or collator which uses DeLuxe Stitcher, ISP/Interlake, 26 Heads or Hohner 52/8, 55/7 and 48/5 Heads.
G20 Head - Like the G8, this head features a side-feed design eliminating the need for a Swivel which results in increased production speeds and decreased down-time. The G20 Head can be used on all dual-drive stitchers or saddle-binders which currently use 18D or Hohner 70/20 Heads.
26/26D Head - This head is one of the most popular style head in the world for both OEMs and end users alike. It is used in literally hundreds of collator applications, as well with a host of different stitcher machines.
18D Head - This head is used predominantly by large printers because of its excellent reputation for reliability. The 18D is extremely versatile and handles a wide range of wire and crown sizes.
DB45 Head - A slim-line alternative Stitcher Head for Muller-Martini saddle binders. The DB45 can be used on all stitchers or collators which currently use the HK45 and HK55 Heads.
DB75 and DB75V Heads - High-quality alternative Stitcher Heads for Muller-Martini, Osako, & Purlex saddle binders. The DB75 and DB75V can be used on all stitchers or collators which currently use the HK75 and HK75V Heads.
With a variety of stitcher heads in multiple configurations just let us know the following information and our trained technician can specify the correct stitcher head to match your requirements.
What make and model of stitching equipment do you have?
What size wire do you use?
What crown size do you require?
What thickness capacity do you require?
Are you doing flat or saddle stitching?
Model
Model G5 Head:
Model G8 Head:
G20 Head:
Capacity
Two sheets to 13/64”
Two sheets to 5/16”
Two sheets to 3/4”
Wire Sizes
25-28 Gauge Round
23-28 Gauge Round and 21x25 Flat
20-28 Gauge Round and 19x21-1/2, 20x25, 21x25 and 20x24 Flat
Crown Sizes Available
1/2”, 13/64" Loop
1/2”, 13/64" Loop
1/2”, 5/8”, 13/64” Loop
Minimum Head Centers
1-1/2” up to 1/32” material thickness
2-3/64” up to 1/16” material thickness
2-3/4” up to 3/16” material thickness
Model
26/26D Head:
18D Head:
Capacity
Two sheets to 1/4”
Two sheets to 9/16”
Wire Sizes
21-28 Gauge Round and 21x25 Flat
20-28 Gauge Round, 19x21-1/2, 20x25, 20x24 and 21x25 Flat, Hybar I & II and .020x.103 Ribbon Wire