The DFC-101 is a compact and easy-to-use collator. Equipped with three feed rollers and adjustable paper separators, the DFC-101 provides reliable and consistent feeding of a wide variety of fine quality, uncoated papers up to 128 gsm. Double feed and mis-feed detections help ensure the accuracy of the collated set. Collated sets are delivered to the integrated stacker and can be straight or offset stacked and the integrated stacker holds up to 3.15".

The DFC-101 has four collating methods; normal, interleave, block mode and alternative. This provides flexibility to more effectively utilize the feed bins to perform a variety of collating applications. New counting modes (counting mode 1 and 2) enable the
DFC-101 to be utilized as a sheet counter. Using counting method 1, the collator ejects paper sheet-by-sheet from the top paper feed bin. When the sheets run out, the bin below will start ejecting sheets. Using counting method 2, the collator ejects paper
sheet-by-sheet from the 1st to the 8th paper feed bins at the same time. The number of processed sheets is displayed on the LCD display. 

Features:

• Up to 7,200 sets per hour LTR LEF Straight Stacking
• Collating modes: normal, interleave, block and alternative
• Two sheet counting modes
• User friendly LCD control panel
• Count up/count down
• Repeat collation
• Test feed
• Paper empty detection
• Paper jam detection
• Stacker full detection.

Specifications:

• Number of Bins - 10
• Bin Capacity - Up to 1.10" (350 sheets of 64 gsm)
• Paper Size - Width: 6.30" - 12.60" (160 mm - 320 mm) / Length: 5.51" - 17.72" (140 mm - 450 mm)
• Paper Weight - 52.3 -128 gsm (Medium and Fine quality paper)
• Speed - Up to 7,200 sets/hr (LTR LEF/ Straight Stacking)
• Power - 110V 60Hz
• Power Consumption - 1.2 - 0.8 Amps
• Dimensions (W x D x H) - 33" x 25" x 40"
• Weight - 143 lbs.

Note: The DFC-101 is a stand alone collator only and will not connect with the DBM-150 Bookletmaker or the DFC-S Corner & Side Stapler.