MountCor Pouch boards are 3/16" thick, featuring gloss or matte low melt thermal laminate and an advanced breathable heat activated adhesive. The adhesive works at lower temperatures and lets you run boards up to three times faster then other heat activated pouch boards. The smooth adhesive is also formulated to adhere to more types of paper letting you mount to 'hard to stick to' media.
MountCor offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable and inert. It aggressively mounts all porous papers and heat sensitive digital prints in dry mount presses or heated roller laminators. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.
Each MountCor Pouch board comes with a low melt thermal laminate in either gloss or matte finish. It also has a release liner between the laminate and the MountCor board. This translucent cover sheet has a grid pattern that makes it easier than ever to position images and also protects the adhesive during storage. The permanent adhesive prevents image separation resulting from shipping or storage at high or extended summer temperatures.
MountCor‘s special air release technology ensures a completely bubble-free mounting. It also delivers a flatter result than standard pouch boards that might bow. MountCor Pouch Boards gives you the performance you need with complete confidence, while saving both time and money compared to gater boars or other premium pouch board products.
Features:
MountCor Pouch Board for all heated roll laminators
Breathable surface reduces bowing and insures smooth results
3/16" thick white foam board
5 mil gloss or matte film attached
Low temperature adhesives safe for all inkjet and other prints
Run at 250 degrees and 2 feet per minute in roll laminators
Permanent bond adhesive
Safe for all types of digital images
Gridded liner for easy alignment
MountCor®‘s adhesive forms a strong, permanent bond with a lower bonding temperature making it safe to mount:
All digital printing,
Toner copiers, laser, plotters,
Water based, solvent, UV and latex inkjet
Resin coated and digital photo papers
Posters and prints
Synthetic papers and substrates
Polyester encapsulated charts and maps
To use, lift up the laminate film and remove the MountCor Coversheet. Place your image on the board and roll down the laminate over your print. Set your laminator to the 3/16" thickness setting, 250 degrees, and process at 2 feet per minute. If you want to run faster, increase the temperature approximately 10 degrees for each foot per minute you increase the speed.
