Keencut Excalibur 3S vertical cutter is economically priced but provides most of the cutting capabilities of the Keencut SteelTraK series cutters. The new self-lubricating bearings included on both cutting heads can handle harder substrates such as Aluminum Composite, PVC, foam board and other rigid substrates used by sign makers.
Operators can quickly access all 3 cutting tools as they are attached to the cutting head; a composite twin wheel cutting head, standard utility blade and scoring blade for acrylic. All blades cut on the same line, so no wasted panels, no mistakes guessing where the cut line is. The Excalibur 3S is fitted with a counter-balance that saves time and operator fatigue, placing the cutting head in any position without it dropping to the bottom.
Features:
All cutters are mounted on machine - No sharp blade holders to remove, store and replace, everything fitted to the machine and ready to go.
Instantly switch tools - It takes no more than 2 seconds to select any of the cutting tools.
Anodised aluminum construction - High grade European extrusions made to Keencut's specification, designed for the purpose.
All blades cut down the same line
Pressure sensitive clamp - The vertical cutter clamping system is unsurpassed it operates perpendicular to the material face and applies the right amount of pressure to grip ACP or lightweight foam centered board.
Clear Sight-line strip - The simple to use clear and true cut-line indicator runs the whole length of the cutter, no fussy laser to set up and calibrate.
Telescopic legs - Set the machine height to suit the user and the workshop environment.
Single piece squaring arm - Manufactured from one piece of high grade aluminum extrusion for perfect horizontal alignment.
Anti-slip safety lock - The cutting blade locked in place even if it is not fully clamped in the holder.
Acrylic Scoring blade - Uses inexpensive standard utility blade for scoring acrylic up to 6mm thick.
Blade supports - Adjustable steel supports allow maximum blade control particularly for thinner tough materials.
Vertical measuring scale - Conveniently measuring the height of the board on the machine.
Left and Right hand measuring stops - Quick set production stops for accurate fast one-off and production cutting.
13 mm (1/2") blade cutting capacity - Cuts materials up to 13 mm (1/2") thick
Auto blade disengagement- When using the lower cutting blade and scoring blade the cutting head. automatically disengages ready for the next cut.
Counter balance - The counter-weight balances the weight of the cutting head for easy strain free use.
Silicon grip cords under clamp. - Non-marking to grip and protects delicate surfaces.
Precision squaring adjuster - Perma-lock squaring adjustment for setting precisely at 90 degrees.
Floor mounted - A-frame construction mounted on the floor, with safety wall fixing at the top. Weight of machine, material and cutting forces go down through the floor.
Minimal maintenance - Incorporates sealed self-lube bearings. No special skills required for maintenance.
Material Maximum Thickness
PVC foamboard - 13 mm
Corrugated/fluted plastic - 13 mm
Foam centered board - 13 mm
Flexible polycarbonate - 3 mm
Magnetic sheet - 4 mm
Cast acrylic/Plexiglas (score& snap) - 6 mm
Aluminium composite panels (Dibond) - 3 mm
MDF - 3 mm
Specifications
Maximum Cut Size: 63"
Overall Size: 96" H x 84" W x 12-16" D
Weight: 200 lbs.
5-year general warranty on all parts (except blades, clamping strips and cutting wheels)
20-year warranty on the bearings used in the cutting head